Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Replacement on Peugeot 407

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Fuse box

Let’s see how to replace the fuses in a Peugeot 407, such as the cigarette lighter fuse if it’s not working. Lift the front bonnet and locate the fuse box. Use a plastic lever to remove the cover located in the dedicated compartment. Once the compartment is open, use needle-nose pliers to pull out the damaged fuses. After this operation, insert the new fuses into the appropriate slots in the compartment. Test the correct functioning of the car by turning on the ignition with the appropriate key. Close the fuse inspection box and the engine compartment after maintenance.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Diagram and Location of the Fuse Boxes on the Peugeot 407
Diagram and Location of the Fuse Boxes on the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) In this guide, you will discover the diagram and location of the fuse boxes on the Peugeot 407 by following these simple steps. First, get inside the…
Location of the fuse box and OBD port of the Peugeot 407
Location of the fuse box and OBD port of the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Inside the Peugeot 407 there are three fuse boxes. The first fuse box is located inside the engine compartment, near the battery. The second fuse box…
Where are the fuse boxes of the Peugeot 407 located?
Where are the fuse boxes of the Peugeot 407 located?
Peugeot 407 (2004-2012 / MK 1) The fuse boxes on Peugeot 407 vehicles are located outside and inside the vehicle cabin. The Peugeot 407 actually has two fuse boxes inside, the firs…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos