Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Diesel fuel filter

See other generations:
Video tutorial

Working with the engine off and the handbrake applied, lift the bonnet and insert the support rod. The diesel filter is located in the engine bay, so as a first step, remove the engine cover. Disconnect the filter pipes by pushing the tab of the connector with a flat-head screwdriver.

Also disconnect the connector, and finally, you can unscrew the cover: for this, you will need a 24 mm spanner. After doing this, remove the filter and place it in a container, taking care not to spill fuel everywhere.

Proceed in reverse for reassembly.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on Peugeot 208
How to Replace the Diesel Filter on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) How to replace the diesel filter on Peugeot 208? Follow these steps: open the car door and pull up the engine compartment release lever located at th…
When to Replace the Timing Belt on the Peugeot 208?
When to Replace the Timing Belt on the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) The timing belt synchronises the operation of the crankshaft with the camshaft (which controls the movement of valves and pistons) and, in some cases…
Replacing the Rear Light on Peugeot 208
Replacing the Rear Light on Peugeot 208
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) In this guide, we will cover the main instructions on how to remove and replace the rear light on a Peugeot 208. First, open the rear boot lid and st…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos