Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to replace the bulb of the dipped beam in the Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Headlight bulb
Operation: How to replace the bulb of the dipped beam in the Peugeot 2008?

Replacing the dipped headlight bulb in the Peugeot 2008 is a simple operation, but made more complicated by the cramped space in which we would have to go to work. Once we have a spare H7 bulb, in the case of the attached video it is an LED bulb, we open the engine hood and remove the large rear cap of the headlight. We take the defective bulb, rotate it counterclockwise and extract it. Insert the spare bulb and tighten it by turning it clockwise. This operation, as mentioned, can be difficult due to the limited space available, but armed with patience it is possible to complete it successfully.


Posted on 17 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos