Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Filters on Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Cabin air filter

Open the bonnet and place the support stay. To remove the filters, first take off the plastic grille near the windscreen, as shown in the video. At this point, you can see the two pollen air filters. Open the flap that has a simple clip on the right and pull out the first of the two filters. This will give you space to also remove the second filter, the more internal and hidden one, by sliding it out sideways (where the first filter was positioned). Now insert the new filters you purchased, paying attention to the insertion direction. Close everything up.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the cabin filter on a Peugeot 208 mk1
Replacing the cabin filter on a Peugeot 208 mk1
Peugeot 208 (2012-2019 / A9, MK 1) The pollen filter, commonly known as the cabin filter, is essential for keeping the air entering the cabin breathable, especially when the air condit…
How to Replace the Cabin Filter on a Peugeot 208
How to Replace the Cabin Filter on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) The cabin air filter (which actually consists of two panels) is located in the engine compartment, on the passenger side, just below the windscreen: …
How do you replace the cabin filter of the Peugeot 208?
How do you replace the cabin filter of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) It will be possible to replace the cabin filter of the Peugeot 208 by opening the hood, so that access can be gained to the panel located at the base…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos