Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reprogram the Remote for a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Key

Today, see how to reset the key for the three-volume model from the Lion brand, the Peugeot 308. This operation can be useful in case of key demagnetisation or if you replace the remote battery and lose the memory. Enter the car and close the doors and locks. Press the start & stop button once. Now, press and hold the lock button on the key for several seconds until it flashes. Turn off the car. The key reset will be complete. As you can see, this is a very simple and quick operation, easy to carry out.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Program the Key in the Peugeot 308 4
How to Program the Key in the Peugeot 308 4
Peugeot 308 (2021-2026 / P5, MK 3) Programming or reprogramming a key/remote for a car, in this case for the Peugeot 308, is done as follows: access the vehicle's interior, close all d…
How do you program the key of the Peugeot 308?
How do you program the key of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To program the key of the Peugeot 308, you need to insert the blank key into the corresponding slot: by doing so, it will be possible to proceed by c…
How to Program a New Remote for the Peugeot 308?
How to Program a New Remote for the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) In this tutorial, you will learn how to program a new remote for the Peugeot 308, a straightforward operation that requires the specified scanner, wh…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - What to do if the key is not detected in the Peugeot 308? Read answer
    • 308 2013-2021 - How to replace the key battery in the Peugeot 308? Read answer

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos