Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Exhaust Tailpipe Replacement

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Exhaust muffler

Video tutorial

First, carry out this repair with the engine cold and the vehicle on a lift. Start by spraying penetrating oil (such as WD40) on the clamp securing the tailpipe to the exhaust pipe; then, unscrew the clamp bolt to widen it and allow the tailpipe to be removed, also disconnecting the rubber mounts that secure it to the chassis.

Once the old tailpipe is removed, clean the mating surface with a wire brush or sandpaper to remove any deposits and facilitate the fitting of the new tailpipe; align and insert the new tailpipe into the exhaust pipe, secure it to the support rubber mounts, and tighten the clamp bolt.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacement of Rear Headlight Bulb
Replacement of Rear Headlight Bulb
Peugeot 106 (1991-2004 / MK 1) Remove the rear headlight from the boot. Once the rear hatch is open, remove the plastic grille located directly in front of the rear headlight, then…
Stabiliser Link Replacement
Stabiliser Link Replacement
Peugeot 106 (1991-2004 / MK 1) The link is the connecting element between the shock absorber and the stabiliser bar: it is constantly subjected to numerous stresses, making the fai…
Replacing the Starter Motor
Replacing the Starter Motor
Peugeot 106 (1991-2004 / MK 1) The starter motor is located on the gearbox at the rear: to access it, you need to get underneath the vehicle, so it is advisable to lift it on a ram…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos