Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse layout for the Peugeot 2008?

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Fuse box

The vehicle has two fuse boxes located inside the cabin. The first is on the left side of the steering wheel at the bottom of the dashboard, protected by a cover, and the second is on the right side behind the glove compartment. The layout for the first box is as follows: F02 Exterior mirrors, headlights, diagnostic socket. F09 Alarm. F10 Independent telematics unit, trailer interface. F11 Electrochromatic rear-view mirror, independent heating. F13 Hi-Fi amplifier, reverse radar. F16 Front airbag 12 V. F17 Audio system, audio system (accessory). F18 Touch screen. F23 Glove compartment light, courtesy mirror, map reading lights. F26 Horn. F27 Windscreen washer pump. F28 Alarm system. F29 Air conditioning compressor. F30 Rear wiper.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

The fuse assignment diagram for the Peugeot 2008, what is it?
The fuse assignment diagram for the Peugeot 2008, what is it?
Peugeot 2008 (2013-2019 / MK 1) The assignment of fuses is done taking into account what each of them protects against electrical overloads. A diagram is created, depicting the afor…
What is the Fuse Diagram for the Peugeot 2008?
What is the Fuse Diagram for the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) If one of the devices in your Peugeot 2008 has suddenly stopped working, you should first check the status of the respective fuses, the diagrams for …
What is the fuse layout of the Peugeot 2008?
What is the fuse layout of the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) In this video we can see where the fuse boxes of the Peugeot 2008 are located and what are the respective diagrams, to consult in case we need to che…

Other guides you may be interested in

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - Where is the cooling fan relay located in the Peugeot 2008? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos