Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset Adblue on the Peugeot 208

Model: Peugeot 208 UB, UJ, UP, MK 2, UW - Years 2019-2026
Part: AdBlue warning light

In this video, you will learn how to reset Adblue on the Peugeot 208. First, start the engine and wait for the onboard computer to power up. On the left gauge, you will see the 'Service' message light up. Turn off the ignition and wait a few seconds before turning it back on. Now, restart the engine and begin to accelerate until the 'Service' message disappears. You need to keep the engine running for at least 25-30 seconds and then turn it off. When you turn the ignition back on, the system should have reset. If not, repeat the entire process from the beginning.

Updated on 25 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Refill AdBlue in the Peugeot 208
How to Refill AdBlue in the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) This mini guide explains how to correctly refill the AdBlue fluid in the respective tank of the Peugeot 208. Remember, the vehicle must be completely…
How to Replace the AdBlue Pump on the Peugeot 208?
How to Replace the AdBlue Pump on the Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To replace the AdBlue pump on the Peugeot 208, lift the car using a ramp so that you can access the components underneath. The pump is located near t…
How do you reset the AdBlue warning light on the Peugeot 208?
How do you reset the AdBlue warning light on the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To reset the AdBlue warning light that appears on the instrument panel of the Peugeot 208, you need to top up with the necessary amount of additional…

Other guides you may be interested in

    Frequently Asked Questions

    • 208 2019-2026 - What does the AdBlue warning light on the Peugeot 208 indicate? Read answer
    • 208 2019-2026 - What to do if the adblue light comes on in the Peugeot 208? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos