Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

After changing the oil and the engine oil filter on this vehicle, you need to reset the service indicator that has illuminated on the dashboard. To do this, proceed as follows: sit in the driver's seat and turn on the ignition, press and hold the button located on the right side of the instrument panel next to the speedometer.

A countdown of 10 seconds will start flashing, at the end of which you can release the button and turn off the ignition. Then, turn the ignition back on to verify that the service light has been successfully cleared.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Peugeot 308
How to Reset the Service Light on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Once you have completed the routine maintenance on the Peugeot 308, proceed to reset the Service light. To do this, sit in the driver's seat, turn on…
How to Reset the Service Light on the Peugeot 308
How to Reset the Service Light on the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) .. This video demonstrates how to reset the service light on the Peugeot 308 MK2 HDI. This operation is necessary following a service.. …
How to reset the "Service" light on a Peugeot 308?
How to reset the "Service" light on a Peugeot 308?
Peugeot 308 (2021-2026 / P5, MK 3) To reset the "Service" light on a Peugeot 308, start by turning on the ignition without starting the engine. Use the buttons on the steering wheel to…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos