Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : Replace the Peugeot 308 engine oil filter

Peugeot 308 - Video tutorial

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Oil filter
Operation: Replace the Peugeot 308 engine oil filter

How to replace the engine oil filter on Peugeot 308? Let's see in this video guide how to proceed with the replacement. We open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same. With a socket wrench we unscrew the large locking pin of the container cap where the oil filter is located. We extract the worn oil filter and place a new one, making it adhere well around the walls of the box. Finally, we put back the cap of the air box and tighten the screws. We close the front hood finally.


Posted on 10 October 2023 by ScegliAuto



How to replace engine oil and oil filter on Peuegot 308
Peugeot 308 (2007-2014 / T7, MK 1) Today we will discover the guide on how to carry out the ordinary maintenance coupon, replacing the engine oil and the oil filter of the Peugeot 308.
How to remove the Peugeot 308 engine oil filter
Peugeot 308 (2007-2014 / T7, MK 1) How to remove the Peugeot 308 engine oil filter? Let's see in this video guide how to proceed with the replacement. We open the car door and pull up
How to maintain your Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial we can see how the Peugeot 308 is serviced. In particular, we are going to see how to replace the engine oil and the oil filte

Other guides that may interest you

    Frequently Asked Questions

    • 308 2007-2014 - Where is the oil filter located in a Peugeot 308 1.2 petrol Read Answer
    • 308 2007-2014 - Where is the Peugeot 308 petrol oil filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos