Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil and filter on a Peugeot 308, park the car on a flat surface and let the engine cool down to make the oil more fluid, then safely lift the vehicle and place a container under the oil sump, unscrew the drain plug and let the used lubricant drain completely; once the drainage is complete, close the plug checking the seal and tightening, then proceed to replace the oil filter by carefully unscrewing it and fitting the new one after lightly lubricating the seal with clean oil; finally, fill the engine with the amount specified by the manufacturer through the top cap, check the level with the dipstick, start the engine for a few seconds and check for leaks, then recheck the level and top up if necessary.


Posted on 27 June 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on the Peugeot 308
How to Replace the Engine Oil and Oil Filter on the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Today, discover how to perform the routine maintenance service by replacing the engine oil and oil filter on the Peugeot 308. First, lift the vehicle…
How to Change the Engine Oil and Filter on the Peugeot 308
How to Change the Engine Oil and Filter on the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) On the Peugeot 308, the job is set up like a classic oil service: secure the vehicle and first drain the used oil, working from underneath with a pro…
How to Remove the Engine Oil Filter of the Peugeot 308
How to Remove the Engine Oil Filter of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos