Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Engine oil

Today, discover how to perform the routine maintenance service by replacing the engine oil and oil filter on the Peugeot 308. First, lift the vehicle and start by undoing the drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes. Next, open the bonnet and use a socket spanner to unscrew the oil filter, replacing the cartridge with a new one and correctly installing the gasket. Now, unscrew the filler cap and top up the oil until it reaches the maximum mark!

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Engine Oil Filter on a Peugeot 308
Replacing the Engine Oil Filter on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How do you replace the engine oil filter on a Peugeot 308? Let's see in this guide how to proceed with the replacement. Open the car door and pull up…
How to Remove the Engine Oil Filter of the Peugeot 308
How to Remove the Engine Oil Filter of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engi…
How to Change the Engine Oil and Filter on the Peugeot 308
How to Change the Engine Oil and Filter on the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) On the Peugeot 308, the job is set up like a classic oil service: secure the vehicle and first drain the used oil, working from underneath with a pro…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos