Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Oil Filter on a Peugeot 308 1.6 HDI

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Oil filter

The oil filter on this model is of the immersion type, not the classic screw-on type, so the replacement involves changing the cartridge. It is essential to also replace the engine oil during the oil filter change. First, remove the splash guard from under the engine, then unscrew the drain plug from the sump and drain the used oil. Next, access the engine bay, remove the plastic cover, and unscrew the cartridge cap located next to the alternator. Extract the old cartridge and insert the new one, replacing the O-rings as well. Finally, fill the engine with new oil until reaching the maximum level.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) Today we will discover the instructions that will allow us to remove and replace the diesel filter on the Peugeot 308 1.6 e-HDi. First, open the vehi…
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial, you will learn how to change the cabin air filter on the Peugeot 308. The filter is located under the bonnet: open it, and at…
Peugeot 308 (2013-2021 / T9, MK 2) In this tutorial, you will learn how to remove and replace the engine air filter on the Peugeot 308 1.6 HDI. First, open the bonnet of your car and d…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos