Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Suspension Wishbone Replacement

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Control arm

The failure of the bushings on the suspension wishbone is a fairly common issue, and in this case, you can choose to replace only the bushings (a repair kit is available in the aftermarket) or the entire wishbone; to replace the wishbone, lift the vehicle on appropriate axle stands and remove the front wheel; then proceed to remove the bolt securing the ball joint to the hub support, followed by the other two anchoring points of the wishbone, one of which requires removing the interior carpet from the driver's side to access the securing bolts of the plate; then reverse the process to fit the new wishbone.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Front Shock Absorber
Instructions for Removing the Front Shock Absorber
Peugeot 106 (1991-2004 / MK 1) To remove the front shock absorber, lift the vehicle on a hydraulic lift, remove the front wheel, free the hub from the suspension wishbone ball join…
Rear Shock Absorber Replacement
Rear Shock Absorber Replacement
Peugeot 106 (1991-2004 / MK 1) To replace the shock absorber, lift the vehicle on a hydraulic lift and, if necessary, support the rear wheel during disassembly to prevent the weigh…
Replacement of Rear Headlight Bulb
Replacement of Rear Headlight Bulb
Peugeot 106 (1991-2004 / MK 1) Remove the rear headlight from the boot. Once the rear hatch is open, remove the plastic grille located directly in front of the rear headlight, then…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos