Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 2008
  6. : How do you remove the rear door panel of the Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Door panel
Operation: How do you remove the rear door panel of the Peugeot 2008?

In order to remove the rear door panel of the Peugeot 2008, you need to loosen the screws that hold it in place: these screws are located on the sides of the panel itself and in the center of the window regulator switch. The latter must be removed from its housing, also disconnecting the connector; at this point, it will be possible to release all the internal clips of the panel, so that it can be removed from the inside of the door. At this point, it will be possible to insert the new panel, fixing it with screws and installing the window regulator switch.


Posted on 17 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos