Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot 508 SW?

Model: Peugeot 508 MK 2 - Years 2018-2026
Part: Warning light – error code

This video demonstrates the simple and quick step-by-step procedure to reset the service light on a Peugeot 508. To perform this procedure, simply start the instrument panel and simultaneously press the button located on the side of the lever to the left of the steering wheel. Once the instrument panel is started while holding the button, a countdown will begin, and at the end of which you can release the button, completing the reset. This procedure can be useful as after servicing the vehicle, the control unit does not register it, leaving the maintenance light on.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 508
How to Reset the Service Light on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) To reset the service light on a Peugeot 508 - after completing the required services - close all four doors of the vehicle. Turn on the ignition: you…
How to Reset the Service Light on a Peugeot 508
How to Reset the Service Light on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) This video shows the procedure to reset the maintenance/service light on a Peugeot 508. To perform this procedure, press and hold the OOOO button loc…
How to reset the ECU and BSI module on the Peugeot 508
How to reset the ECU and BSI module on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this guide we will see the instructions that will allow us to reset the engine control unit and the BSI module of the Peugeot 508, but also on mos…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos