Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to use Cruise Control on the Peugeot 2008

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Instrument cluster
Operation: How to use Cruise Control on the Peugeot 2008

The cruise control command on the Peugeot 2008 is located behind the steering wheel. By turning the wheel upwards, the speed limiter is activated, meaning you set a limit and the car will not allow you to go faster than that limit. Turning it downwards activates the cruise control instead. Once the desired speed is reached, simply press one of the two buttons behind the steering wheel to confirm it, and the car will continue to travel at that speed. When any pedal is pressed, the cruise control goes on pause. Pressing the button at the tip of the steering wheel immediately reactivates it. From the cruise control, we can also adjust the speed up or down using the lower and upper buttons on the steering wheel. With the speed limiter active, pressing a pedal puts it on pause. To restart it, it works the same as the cruise control. Pressing the "minus" button twice adapts to the speed limit read from road signs.


Posted on 17 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - What does the orange engine warning light on the Peugeot 2008 indicate? Read Answer
    • Peugeot 2008 2013-2019 - What does the red engine warning light on the Peugeot 2008 indicate? Read Answer
    • Peugeot 2008 2019-2026 - Why is the Peugeot 2008 AdBlue warning light flashing? Read Answer
    • Peugeot 2008 2019-2026 - What does the Peugeot 2008 AdBlue light mean? Read Answer
    • Peugeot 2008 2019-2026 - What problems at start and stop on the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Why does the Peugeot 2008 instrument cluster not light up? Read Answer
    • Peugeot 2008 2019-2026 - When does the AdBlue error light appear on the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - What problems does the Peugeot 2008 screen have? Read Answer
    • Peugeot 2008 2013-2019 - What is the meaning of the yellow warning lights on the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - What does it mean when the engine trouble light comes on on the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What to do if there is an engine malfunction message on Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What does the Peugeot 2008 AdBlue warning light mean? Read Answer
    • Peugeot 2008 2019-2026 - What does the orange warning light on the steering wheel of the Peugeot 2008 Mk2 mean? Read Answer
    • Peugeot 2008 2019-2026 - What to do when the Peugeot 2008 engine failure warning light comes on? Read Answer
    • Peugeot 2008 2019-2026 - What does the Peugeot 2008 AdBlue warning light mean? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the service warning light comes on on Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Where are the Peugeot 2008 warning lights shown? Read Answer
    • Peugeot 2008 2013-2019 - What does the AdBlue warning light indicate on the Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos