Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How to replace the rear headlight bulbs on Peugeot 208?

Peugeot 208 - Video tutorial

Model: Peugeot 208 MK 1, A9 - Years 2012-2019
Part: Rear light bulb
Operation: How to replace the rear headlight bulbs on Peugeot 208?

Let's see in this short video tutorial how to replace the rear light bulbs of a first-generation Peugeot 208 produced from 2012 to 2019. In order to remove the light bulbs, first we need to remove the rear light, and to do this, we have to open the trunk and remove the plastic cover located on the sides of the trunk. Then, we disconnect the connector and unscrew the plastic screw that secures the headlight. Once this is done, we can slide out the rear light and remove it. Finally, we can open the light to replace the bulbs. We reassemble everything following the reverse procedure.


Posted on 20 July 2023 by ScegliAuto



How to replace headlight bulbs on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) How to replace the bulbs mounted in the headlight of a Peugeot 208? We open the front hood by pulling the lever located at the bottom right of the da
We replace burnt out bulbs on a front headlight of a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) We replace the burned out bulbs on a front headlight of a Peugeot 208: open the front hood by pulling the lever located at the bottom right of the da
How to replace the headlight bulbs of a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Let's see how to replace the bulbs mounted in the headlight of a Peugeot 208: open the front hood by pulling the lever located at the bottom right of

Other guides that may interest you

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos