Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Boxer
    4. : How to reset the oil light on the 2018 Peugeot Boxer 3.

Peugeot Boxer - Video tutorial

Model: Peugeot Boxer MK 2 - Years 2006-2023
Part: Checks and maintenance
Operation: How to reset the oil light on the 2018 Peugeot Boxer 3.

All you have to do to reset the oil light of the 2018 Peugeot Boxer is to turn on the instrument panel and simultaneously press the brake and accelerator pedals. While continuing to press the pedals, start the car's engine. Keep pressing the pedals until the service light starts flashing. Then release the pedals and turn off both the engine and the instrument panel. This way you will have performed the reset, it is important to perform the reset only if you have actually serviced the car. Incorrect behavior could damage the car.


Posted on 23 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Boxer 2006-2023 - How to reset the service light on a Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - What are the warning lights of the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - How do you turn off the service light on the Peugeot Boxer 3? Read Answer
    • Boxer 2006-2023 - How do you reset the Peugeot Boxer Service light? Read Answer
    • Boxer 2006-2023 - What to do if the Peugeot Boxer oil light flashes? Read Answer
    • Boxer 2006-2023 - How do you clear the brake warning light on the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - How to reset the service in the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - How to do a service reset in the 2019 Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - What warning lights are there in the dashboard of the Peugeot Boxer van? Read Answer
    • Boxer 2006-2023 - How to replace the H7 bulb of a Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - AdBlue warning light on in the Peugeot Boxer, what to do? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos