Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing chain on a Peugeot Boxer?

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the timing chain on a Peugeot Boxer, open the bonnet to access the components located on the left side of the engine, on the passenger side. There will be a cover that needs to be removed by unscrewing the screws and also removing any obstructive components like the windscreen washer reservoir.

By removing the front right wheel, you can access the chain, which can be removed by unscrewing the bolts securing the tensioner; at this point, you can fit the new one, ensuring everything functions correctly.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
Peugeot Boxer (2006-2024 / MK 2) If you own a Peugeot Boxer second series (2015) and want to learn how to replace the front headlamp bulb, just carefully read the instructions below …
How to Set the Time on a Peugeot Boxer
How to Set the Time on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Before you can start, sit in the driver's seat of your Peugeot Boxer. Begin by activating the instrument cluster by turning the key in the ignition s…
How to Remove the Starter Motor on a Peugeot Boxer
How to Remove the Starter Motor on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Want to remove the starter motor from the Peugeot Boxer? Here’s how to do it from inside the engine compartment. Disconnect the battery terminals loc…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos