Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Peugeot Partner?

Model: Peugeot Partner Tepee MK 1 - Years 1996-2013
Part: Service warning light

To reset the Service light on the Peugeot Partner, press and hold the button located on the right side while it is off. While holding the button, insert the ignition key into the instrument cluster, turn it, and switch on the instrument cluster: you will notice the spanner icon appearing with a countdown starting from ten. Continue to hold the button until the countdown ends, and you will see that the Service light will disappear from the display, allowing you to turn it off.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Peugeot Partner?
How do you reset the Service light on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) On the instrument panel of the Peugeot Partner, the Service light that is displayed can be reset by holding down the button located on the right side…
How to reset the service light on the 2014 Peugeot Partner
How to reset the service light on the 2014 Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) If you have a 2014 Peugeot Partner and are wondering how to perform the manual reset procedure for the service light, then all you need to do is foll…
How to Reset the Service Light on a Peugeot Partner?
How to Reset the Service Light on a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) To correctly reset the Service light displayed on the instrument panel of the Peugeot Partner, press and hold the button located at the bottom left o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos