Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Expert
    4. : Resetting the service light of the Peugeot Expert.

Peugeot Expert - Video tutorial

Model: Peugeot Expert Mark2, MK 2 - Years 2008-2016
Part: Checks and maintenance
Operation: Resetting the service light of the Peugeot Expert.

After changing the engine oil of the Peugeot Expert, we need to reset the verification system that reminds us, by turning on a wrench-shaped warning light on the display, of the need for this maintenance operation. We sit in the driver's seat, press and hold the button below the display, with a wrench symbol printed on it; we turn the key to turn on the instrument panel, and we will see a countdown from ten to zero on the display. Once it is finished, we turn off the instrument panel, wait a few seconds, and turn on the ignition to check the reset.


Posted on 14 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Expert 2016-2024 - Why did the AdBlue warning light come on in the Peugeot Expert van? Read Answer
    • Expert 2016-2024 - In the past, probable problems with the engine of the Peugeot Expert have been highlighted? Read Answer
    • Expert 2008-2016 - How do you set the time on the Peugeot Expert? Read Answer
    • Expert 2016-2024 - How do you reset the adblue light in the Peugeot Expert? Read Answer
    • Expert 2016-2024 - What happens if the pressure sensor on the Peugeot Expert breaks? Read Answer
    • Expert 2016-2024 - What does the AdBlue warning light on the Peugeot Expert indicate? Read Answer
    • Expert 2008-2016 - How to reset the "Service" warning light on a Peugeot Expert? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos