Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Electric Handbrake on a Peugeot 2008

Model: Peugeot 2008 MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Parking brake

See other generations:
Video tutorial

In this video, you can see how to disable the electric handbrake on a Peugeot 2008: first, turn off the engine and note that the handbrake activates automatically. To disable it, turn the ignition back on, press both the brake and clutch pedals, and then hold down the handbrake button located on the centre console for a few seconds.

After that, you can turn off the ignition while still holding the button down. After a moment, you can release it, and the handbrake will remain off. You can now work on the rear brakes.

When you're ready to reactivate it, simply pull the handbrake, and it will engage again. That's all.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to Disable the Traction Control in the Peugeot 2008?
How to Disable the Traction Control in the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) In this tutorial, we will see how to disable the traction control in the Peugeot 2008, a very simple and quick operation to perform only if necessary…
How do you deactivate the start and stop feature in the 2021 Peugeot 2008?
How do you deactivate the start and stop feature in the 2021 Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) The start and stop feature is designed to save fuel and reduce car emissions, in fact it automatically turns off the engine when the car stops and re…
Removing the Centre Console of the Peugeot 2008 and Adjusting the Handbrake
Removing the Centre Console of the Peugeot 2008 and Adjusting the Handbrake
Peugeot 2008 (2013-2019 / MK 1) This video demonstrates how to dismantle the centre console of the Peugeot 2008 to adjust the handbrake. First, remove the cup holder from under the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos