Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : Where is the fuse box located in the Peugeot 107?

Peugeot 107 - Video tutorial

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Fuse box
Operation: Where is the fuse box located in the Peugeot 107?

The Peugeot 107 has two fuse boxes inside. The first fuse box is located in the engine compartment, specifically near the battery. The second fuse box is located inside the cabin, specifically behind the steering wheel. Today we will explain how to access the fuse box located behind the steering wheel. First, disconnect the battery and the airbag system on the driver's side. Then, turn the steering wheel to the left twice to remove the first bolt, and then once to the right to remove the second bolt. Unscrew the bolt above the steering wheel to lift the tachometer. Remove the cover to access the fuse box.


Posted on 2 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 107 2005-2014 - Where is the horn fuse located on the Peugeot 107? Read Answer
    • 107 2005-2014 - Where is the fuse for the turn signals of the 107 located? Read Answer
    • 107 2005-2014 - Where are the fuse boxes located on the Peugeot 107? Read Answer
    • 107 2005-2014 - Where is the fuse box located, in the Peugeot 107? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos