Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Key for a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Key

Reprogramming the key for a Peugeot 308 is necessary when the vehicle's ECU malfunctions. To program the key/remote, enter the car and start the engine, rev it to 3,000 RPM, then turn off the vehicle. Next, lock and unlock the vehicle from the inside twice in a row. By doing this, you will have reprogrammed your remote. If the problem persists, it may be necessary to replace the vehicle's antenna or visit a workshop for a diagnostic check.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key of the Peugeot 308?
How do you program the key of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To program the key of the Peugeot 308, you need to insert the blank key into the corresponding slot: by doing so, it will be possible to proceed by c…
How to Program the Key of the Peugeot 308
How to Program the Key of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Today's video will show you the necessary instructions for programming the ignition key of the Peugeot 308. First, get inside the vehicle and connect…
How do you program the key of the Peugeot 308?
How do you program the key of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) In order to program the key of the Peugeot 308, you need to insert it into the ignition switch, and then connect a diagnostic tool to the OBD port of…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - What to do if the key is not detected in the Peugeot 308? Read answer
    • 308 2013-2021 - How to replace the key battery in the Peugeot 308? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos