Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot Partner/Citroen Berlingo

Model: Peugeot Partner Tepee MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Peugeot Partner/Citroen Berlingo, start by turning on the ignition and noting that the spanner symbol is flashing, indicating that a service is due. Turn off the ignition; to reset it, hold down the button to the left of the odometer while simultaneously turning on the ignition without starting the engine.

You will notice a countdown has begun, and when the countdown reaches zero, you can release the button to the left of the odometer and turn off the ignition.

Finally, check if the reset was successful by turning on the ignition again and observing the new mileage corresponding to the spanner symbol.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Light on the Peugeot Partner - Citroen Berlingo
How to Replace the Number Plate Light on the Peugeot Partner - Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) This guide shows you how to remove and replace the number plate bulb on the Peugeot Partner, as well as the Citroen Berlingo. First, open the tailgat…
How to reset the "Service" light on a Peugeot Partner?
How to reset the "Service" light on a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) To reset the "Service" light on a Peugeot Partner, turn on the instrument panel without starting the engine by turning the key in the ignition to the…
How to Replace the Third Brake Light Bulb of a Peugeot Partner
How to Replace the Third Brake Light Bulb of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Today, we'll explain how to independently replace the third brake light bulb of a Peugeot Partner Tepee. Start by opening the left rear door and proc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos