Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

Replacing the battery of a Peugeot 308 is a task that can be easily done independently, thanks to our tutorial video. Start the battery removal by taking out the resonator to gain better access to the battery; use a Torx screwdriver to remove the two screws.

Continue by disconnecting the positive terminal and its connector, then remove the negative terminal and its connector, disconnect the battery cables, and extract the battery from its housing. Finish by thoroughly cleaning the battery compartment before inserting the new battery.

To install the new battery, simply follow the above steps in reverse.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How do you replace the battery of the Peugeot 308?
How do you replace the battery of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To replace the battery installed on the Peugeot 308, you need to open the hood to access the components in the engine compartment: on the top right, …
How to replace the battery of a Peugeot 308 key?
How to replace the battery of a Peugeot 308 key?
Peugeot 308 (2021-2026 / P5, MK 3) To replace the battery of a Peugeot 308 key, start by locating the small hole on the side of the key. Using a flathead screwdriver or a similar tool,…
How do you replace the battery of the Peugeot 308?
How do you replace the battery of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To replace the battery installed on the Peugeot 308, you need to open the hood so that you can access the components in the engine compartment: the b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos