Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS sensor of the Porsche Cayenne

Model: Porsche Cayenne MK 3 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

In this video we can see how to reset the TPMS light on Porsche Cayenne from 2018 onwards, specifically those equipped with a touchscreen multimedia display. We need to go to the "vehicle" menu and select "tyre pressure". Select "set pressure" or "reset TPMS" and follow the on-screen instructions to confirm.

If manual reset fails, then we will need our OBD2 tool: PIWIS is the official Porsche tool. The port is located under the dashboard on the driver's side, select TPMS reset/Porsche/Cayenne and follow the steps to reset the sensors or the "relearn" procedure.

If the light continues to stay on, common causes are a low sensor battery, a deformed wheel, or issues with the control unit.


Posted on 12 August 2025 by ScegliAuto


Related tutorials

…
How to Reset the TPMS on a Porsche Cayenne
How to Reset the TPMS on a Porsche Cayenne
Porsche Cayenne (2010-2017 / MK 2) In this video, see how to reset the TPMS on a Porsche Cayenne: in this case, there was a flat tire, so the system continues to indicate that the vehi…
How to Reset the TPMS Learning System on a Porsche Cayenne
How to Reset the TPMS Learning System on a Porsche Cayenne
Porsche Cayenne (2010-2017 / MK 2) Let's see how to reset the TPMS learning system on a Porsche Cayenne: turn on the ignition and navigate to the TPMS menu using the steering wheel but…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos