Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Air Filter on the Porsche 997

Model: Porsche 911 997 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

Changing the air filter on the Porsche 997 is a task performed approximately every 12,400 miles and greatly helps the proper functioning of the engine. Common tools are needed, including T25 and T20 wrenches, and of course, a replacement filter, which can be easily found on major e-commerce platforms starting at around $130. The first step is to disconnect the solenoid valve by pressing the gray button.

Next, remove the hose located above the airbox. Now, using a 25 mm wrench, remove the nuts from the protective cover; be careful not to drop them into the engine while removing.

Once the cover is off, you will find the two filters, which are very dirty. Remove them using a 20 mm wrench, which is quite simple.

After removing the filters, clean the base and only then install the new ones. Replace the cover, reconnect the hose, and reconnect the solenoid valve.

Job complete.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to remove the stuck key on a Porsche 997
How to remove the stuck key on a Porsche 997
Porsche 911 (2005-2011 / 997) In this video we can see how to do if the key gets stuck in the ignition of the Porsche 997: there is no need to panic, there is a practical and easy…
How to Remove the Door Panel on a Porsche 997?
How to Remove the Door Panel on a Porsche 997?
Porsche 911 (2005-2011 / 997) In this tutorial, you will see how to remove the door panel on a Porsche 997, a very simple and quick operation. First, open the door you will be wor…
How to change the battery of the Porsche 997 key
How to change the battery of the Porsche 997 key
Porsche 911 (2005-2011 / 997) In this article, we will explain how to replace the battery of the Porsche 997 key in case the battery runs out. To replace the battery, you will nee…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos