Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Porsche 911?

Model: Porsche 911 Carrera3.2 - Years: 1984, 1985, 1986, 1987, 1988, 1989
Part: Engine oil

See other generations:
Video tutorial

Changing the engine oil in a Porsche 911 is not much different from other cars, except that the bolts to remove for draining the used oil are not just one. As always, the first step is to open the oil filler cap to facilitate the flow of the oil to be replaced, then lift the car on jack stands or a lift to make the job easier.

Remove the bolts and wait about 10 minutes for the oil to finish draining, and in the meantime, replace the filter located in the rear hood.

Reinstall the bolts and add the new oil through the designated opening.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on the Porsche 911
How to Change the Engine Oil and Oil Filter on the Porsche 911
Porsche 911 (2005-2011 / 997) Today, let's explore the guide on how to perform routine maintenance by changing the engine oil and oil filter on the Porsche 911. First, lift the ve…
How to Change the Engine Oil in a Porsche 911?
How to Change the Engine Oil in a Porsche 911?
Porsche 911 (2011-2019 / 991) To change the engine oil in a Porsche 911, loosen the bolt that secures the oil drain plug: this is located at the rear bottom of the vehicle, near t…
How to Replace Engine Oil and Filter on Porsche 911
How to Replace Engine Oil and Filter on Porsche 911
Porsche 911 (1982-1991 / ) How to replace engine oil and filter on Porsche 911? Follow these steps: Open the rear hood and lift it up, secure it, and remove the oil filler cap.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos