Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Fuel Filter on a Dodge RAM 1500

Model: RAM 1500 MK 5, DT - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Diesel fuel filter

See other generations:
Video tutorial

You can use the same procedure to replace the fuel filter on a Jeep Wrangler. Raise the rear of the vehicle as you will need to work underneath.

Just ahead of the rear wheel, you will find the fuel filter: rotate and then open the small valve that filters out water from the fuel (if nothing comes out, that's a good sign). Unscrew the cover of the filter box and remove it. You may notice that it has an o-ring installed, so remember to install the o-ring on the new filter as well (it should come with the filter).

Proceed in reverse for reinstallation.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

RAM 1500 (1994-2001 / MK 2, BR, BE) Replace the starter motor on the Dodge RAM 1500 by following the instructions below. First, open the hood and disconnect the battery. Then, lift the …
RAM 1500 (1994-2001 / MK 2, BR, BE) Today, you will learn how to remove and replace the serpentine belt or alternator belt on the Dodge RAM 1500 in this video tutorial. First, open the …
RAM 1500 (2009-2019 / DS, DJ, MK 4) To replace the air filter of the Dodge Ram 1500, open the hood to access the engine compartment. The air filter box is located in the center of the c…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos