Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Plugs on the Dodge RAM 1500 Engine Block?

Model: RAM 1500 MK 2, BR, BE - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the plugs on the Dodge RAM 1500 engine block, lift the vehicle using a lift to access the lower components of the engine bay. Disconnect the bolts and connectors securing the fuel filter; this will allow access to the plugs, which must be removed from their housing using pliers.

Once the old plugs are removed, install the new replacement parts, and then reinstall the fuel filter by securing it with the bolts and reconnecting it.


Updated on 7 May 2026 by ScegliAuto


Related tutorials

Replace the Starter Motor on the Dodge RAM 1500
Replace the Starter Motor on the Dodge RAM 1500
RAM 1500 (1994-2001 / MK 2, BR, BE) Replace the starter motor on the Dodge RAM 1500 by following the instructions below. First, open the hood and disconnect the battery. Then, lift the …
2003 Dodge Ram 1500 Fuse Box Diagram
2003 Dodge Ram 1500 Fuse Box Diagram
RAM 1500 (2002-2009 / D1, DM, DC, MK 3, DR, DH) This video shows the location of the fuse boxes in the 2003 Dodge Ram 1500. In addition to the location of the fuse boxes, the video displays the dia…
How to Replace the Cabin Filter on the Dodge RAM 1500
How to Replace the Cabin Filter on the Dodge RAM 1500
RAM 1500 (2019-2026 / MK 5, DT) To replace the cabin filter on the Dodge RAM 1500, open the glove compartment to detach the clips inside by pulling the drawer out of its housing. On…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos