Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to carry out the service on the RAM 3500 6.7L

Model: RAM 3500 DJ, DS, MK 4 - Years 2009-2019
Part: Engine oil

Let's see in this guide the steps that will allow us to carry out the routine maintenance service, replacing the engine oil and the oil filter of the RAM 3500 6.7 liters. First we lift the car and start unscrewing the oil vent bolt that we find on the sump, letting it drain in a container for about ten minutes; then we go to unscrew and remove the oil filter, accessing it from the left wheel arch, as shown in the video. Now we gently screw and tighten the new oil filter cartridge; then pour in the new engine oil!

Posted on 13 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to carry out the service (oil change) on the Ram 3500 MK4
RAM 3500 (2009-2019 / DJ, DS, MK 4) In this video we see the instructions that will allow us to carry out the routine maintenance service of the Ram 3500 fourth series oil change. First…
How to change the engine oil on the RAM 3500 6.7L
How to change the engine oil on the RAM 3500 6.7L
RAM 3500 (2019-2026 / MK 5, DT) Let's see in this video how to carry out the regular maintenance service of the oil change of the RAM 3500 with 6.7 L engine. container for about ten…
How to change Ram 3500 6.7L engine oil (2020)
How to change Ram 3500 6.7L engine oil (2020)
RAM 3500 (2019-2026 / MK 5, DT) Today we will see the steps on how to carry out the routine maintenance service of the oil change of the 2020 Ram 3500, with 6.7 L engine. First we l…

Other guides you may be interested in

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos