Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Ram 3500 6.7L (2020)

Model: RAM 3500 MK 5, DT - Years 2019-2026
Part: Engine oil

Today, we will go through the steps to perform the routine maintenance oil change on the 2020 Ram 3500 with a 6.7L engine. First, lift the vehicle and start by unscrewing and removing the oil drain plug located under the engine, allowing it to drain into a container for about ten minutes; then, proceed to unscrew and remove the oil filter, accessing it from the right front wheel well, as shown in the video. At this point, replace the cartridge with a new one and finally pour in the new engine oil, ensuring it meets the required specifications!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Engine Oil on RAM 3500 6.7L
How to Change Engine Oil on RAM 3500 6.7L
RAM 3500 (2019-2026 / MK 5, DT) In this video, learn how to perform the routine maintenance oil change on the RAM 3500 with a 6.7 L engine. First, lift the vehicle and start by remo…
How to Replace the Engine Oil and Oil Filter on a RAM 3500
How to Replace the Engine Oil and Oil Filter on a RAM 3500
RAM 3500 (2009-2019 / DS, DJ, MK 4) This short and simple video will show you the procedure for performing routine maintenance by replacing the engine oil and oil filter on a RAM 3500. …
How to Change Engine Oil on a 1997 Dodge Ram 3500
How to Change Engine Oil on a 1997 Dodge Ram 3500
RAM 3500 (1993-2002 / BR, MK 2, BE) In today's video, you will learn the instructions to perform routine maintenance by changing the engine oil and oil filter on a 1997 Dodge Ram 3500 D…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos