|
Do it yourself
| |||
| ||||
How to replace the front brakes on the Dodge Ram 1500 Mk4
Model: RAM 1500
DS, MK 4, DJ
- Years 2009-2019
The guide shows you how to replace the front brakes on the Dodge Ram 1500 Mk4. The first step is to unscrew the wheel fixing bolts, lift the vehicle safely and remove the rim. With a 13 mm wrench, unscrew the two brake caliper fixing bolts and loosen the piston using a lever. Hang the brake caliper in such a way as not to damage the hydraulic pipe. Extract the two brake pads and remove the caliper holder. Remove the disk fixing washer and extract it; help yourself by hitting between the fixing bolts with a hammer. Clean the hub brake housing, the caliper support and the new brake disc. Install in position the brake disc, the caliper support and the pads greased with the specific lubricant. Push the caliper pistons backwards with the help of the special tool. Install the element in position and reassemble everything. At this point the operation is finished.
Posted on 22 August 2022 by ScegliAuto
Video tutorial
Related tutorials
RAM 1500
(2009-2019 /
DS, MK 4, DJ)
In this video tutorial today we can see how to replace the brake pads on a Dodge Ram 1500. Let's start by lifting the car and removing the wheel, now…
RAM 1500
(2009-2019 /
DS, MK 4, DJ)
Let's see in this guide the main instructions that will allow us to remove and replace the front brake pads of the RAM 1500. First we lift the car an…
RAM 1500
(2009-2019 /
DS, MK 4, DJ)
In this short and simple guide we will see how to remove and replace the battery of the Dodge Ram 1500, fourth generation. First we open the engine h…
Other guides you may be interested in
|
How to Install the Original Car Radio in a Mitsubishi Colt
How to install the original car radio in a Mitsubishi Colt? This video carefully shows how to disassemble and reassemble it. Unscrew the screws on the central dashboard using a screwdriver as shown in the video, then, using a plastic or metal lever, pry off the central trim of the dashboard. Remove the frame from the dashboard, and take out the plastic glove compartment along with the trim. Unscrew the retaining screws around the car radio, remove the stereo from the dashboard (disconnecting the various power cables). Finally, reassemble the car radio in the dashboard as it was disassembled earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |