Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you check the oil level of the Ram 1500?

Model: RAM 1500 BR, BE, MK 2 - Years 1994-2001
Part: Engine oil

To check the oil level of the Ram 1500, you need to open the hood so that you have access to the components inside the engine compartment. In the central part of it, next to the alternator, you will be able to locate the dipstick for checking the oil level: this must be pulled out, cleaned with a cloth, and reinserted into the tank. This way you can ensure that the oil level is between the minimum and maximum marks. If the level is below the minimum, you will need to add more oil through the vent located on the right side of the engine compartment.

Posted on 27 May 2023 by ScegliAuto

Video tutorial

Related tutorials

Changing the engine oil on Dodge RAM 1500
Changing the engine oil on Dodge RAM 1500
RAM 1500 (2009-2019 / DS, MK 4, DJ) In this video tutorial you can see how it is possible to change the engine oil on Dodge RAM 1500 model 5700 HEMI PETROL, following a few simple steps…
How to reset the AdBlue warning light in the RAM 1500 pick-up truck?
How to reset the AdBlue warning light in the RAM 1500 pick-up truck?
RAM 1500 (2019-2026 / MK 5, DT) If the AdBlue warning light has come on in the instrument panel of our RAM 1500 pick-up truck, it means that the liquid in the anti-pollution system …
How to inspect the transmission fluid of a RAM 1500 with ZF 8HP70 transmission.
How to inspect the transmission fluid of a RAM 1500 with ZF 8HP70 transmission.
RAM 1500 (2019-2026 / MK 5, DT) In this video we can see how to inspect the transmission fluid of a RAM 1500 with a ZF 8HP70 gearbox: first of all, we need to bring the gearbox flui…

Other guides you may be interested in

How to Remove the Handbrake Button on a VW Passat

Have you encountered problems with the electric handbrake button on your Passat? Here’s how to proceed with the disassembly and reassembly of the part. Open the inspection compartment at the bottom left of the dashboard. Reach in and locate the handbrake button (from the inside of the dashboard). Press the button until it comes out of its housing, then disconnect the button from the power cable. Install the new handbrake button: first connect the plug to the button, then insert it into the dashboard housing. Finally, test the correct operation of the brake.

Watch the video!


by ScegliAuto

More videos