|
Do it yourself
| |||
| ||||
How to reset the "Service" light on a Renault Austral?
Model: Renault Austral
MK 1
- Years 2022-2026
To reset the "Service" light on a Renault Austral, start by turning on the instrument panel without starting the engine. Using the buttons on the steering wheel, access the onboard computer menu. Navigate through the options until you find the section dedicated to maintenance or service intervals. Usually, this option is located under the "Vehicle" or "Maintenance" menu, where you can view the status of service intervals and the need for a reset. Once you have found the maintenance menu, select the option to reset the service interval. To complete the reset, hold down the confirmation button on the steering wheel for a few seconds, until you see a message confirming the reset. At that point, the "Service" light will turn off, indicating that the maintenance interval has been updated correctly. This process is essential to keep track of vehicle maintenance and ensure that the light does not come on prematurely. If the reset does not work on the first try, repeat the procedure carefully following the steps indicated on the onboard computer display.
Posted on 17 September 2024 by ScegliAuto
Video tutorial
Related tutorials
Renault Austral
(2022-2026 /
MK 1)
These brief and simple instructions will show you how to reset the maintenance and service light on a Renault Austral. First, get into the vehicle an…
Renault Austral
(2022-2026 /
MK 1)
To manually reset the service light of your new 2025 Renault Austral, simply follow the procedure outlined in this new guide. First, you need to get …
Renault Austral
(2022-2026 /
MK 1)
On the instrument panel of the Renault Austral, it will be possible to make the Service light disappear by turning on the instrument panel, inserting…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.422
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
