Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Engine Oil Life on a Renault Laguna

Model: Renault Laguna MK 2, X74, Laguna 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will learn how to reset the remaining oil life on a second-generation Renault Laguna. Start by inserting the ignition key and turning on the vehicle's ignition without starting the engine.

Next, press the end button on the right stalk of the steering wheel to scroll through the options on the speedometer's information display. Continue scrolling until you reach the option that shows the remaining kilometres until the next maintenance.

At this point, press and hold the end button again until the kilometres are fully reset, as shown in the video.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to check the oil level on a Renault Laguna III
How to check the oil level on a Renault Laguna III
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In this video we can see how to check the oil level on a Renault Laguna III: in fact, on this car the oil level is not checked using the usual dipsti…
Resetting the maintenance light on the Renault Laguna 2
Resetting the maintenance light on the Renault Laguna 2
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) In today's tutorial, we will see how to reset the regular maintenance light for the oil change on the Renault Laguna second series, following these s…
How to Reset the Oil Service on a Renault Laguna?
How to Reset the Oil Service on a Renault Laguna?
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In this tutorial, you will see how to reset the oil service on a Renault Laguna, a very simple and quick operation to perform only after completing a…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos