|
Do it yourself
| |||
| ||||
How to reset the service light on a 2014 Renault Clio
Model: Renault Clio
MK 4, Clio IV, Clio 4
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
When the service light comes on in a Renault Clio, it indicates that a service is due, which includes changing the engine oil and oil filter, replacing the air filter, checking and possibly topping up or replacing various fluids, and inspecting the engine and timing belt for any necessary replacements. The cost of the service is approximately £450. The reset of the light must be done immediately after. To reset the service light and set the next mileage interval, turn on the ignition, press the button on the right stalk, and select "SERVICE INTERVALS". Hold the button until the light goes out, then turn off the ignition and turn it back on to complete the reset.
Updated on 5 November 2026 by ScegliAuto
Related tutorials
Renault Clio
(2005-2013 /
Clio III, MK 3, Clio 3)
Today's brief instructions will show you how to reset the routine maintenance light for the engine oil change on the Renault Clio. First, get in the …
Renault Clio
(2012-2019 /
MK 4, Clio IV, Clio 4)
To reset the service light on a 2018 Renault Clio 4, we need to insert the vehicle's key card into the ignition slot and turn on the instrument panel…
Renault Clio
(2012-2019 /
MK 4, Clio IV, Clio 4)
Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Remove the Cabin Fan in the Nissan Qashqai?
The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.094
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |