Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Change Light on the Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Service warning light

Today's brief instructions will show you how to reset the routine maintenance light for the engine oil change on the Renault Clio. First, get in the car and turn on the ignition; then enter the onboard computer menu and scroll through the options until you reach the service interval or maintenance key, as shown in the video. At this point, press and hold the up arrow button on the right stalk to reset the mileage before the next service, clearing the maintenance key!

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2019 Renault Clio?
How to Reset the Oil Light on a 2019 Renault Clio?
Renault Clio (2019-2026 / Clio V, Clio 5) The author of this video demonstrates how simple it is to reset the oil change light on the 2019 Renault Clio V. The first thing he does, as we can s…
Oil Change Reset on Renault Clio
Oil Change Reset on Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Thanks to this brief tutorial, you will see the entire procedure necessary to reset the oil change warning light and its interval on a Renault Clio 4…
Reset the Service Light (Oil Change) on the Renault Clio
Reset the Service Light (Oil Change) on the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This brief guide explains how to reset the service light for the routine maintenance oil change on the Renault Clio. First, get in the vehicle and tu…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos