Do it yourself
Frequently asked questions about cars and motorcycles

How to activate the automatic lights of the Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

In this short guide, we will see the instructions that will allow us to activate the automatic lights on the Renault Megane, in simple and quick steps. First of all, we get on board the car and start the dashboard and the engine; then we rotate the light selector located on the left lever of the steering wheel, setting the position of the automatic lights, as shown in the video.

We then verify the correct functioning of the lights during the day; it is possible to turn on the lights both manually and automatically, always through the appropriate selector.


Posted on 17 February 2025 by ScegliAuto


Related tutorials

Renault Megane (2015-2023 / Megane IV, Megane 4) To disable the automatic folding mirrors on a Renault Megane, connect a diagnostic tool to the vehicle's OBD port, located on the dashboard just belo…
Renault Megane (2008-2015 / Megane III, Megane 3) This video shows how to activate the daytime running lights setting on a Renault Megane II: notice that on the top of the lever to the right of the s…
Renault Megane (2015-2023 / Megane IV, Megane 4) You can reset the EDC automatic gearbox on the Renault Megane by connecting a diagnostic tool to the vehicle's OBD port, located just below the steer…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos