Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light bulb of the Renault Fluence

Model: Renault Fluence MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: License plate light

Video tutorial

In this video we can see how to change the license plate light bulb on a Renault Fluence: this is a car that was marketed especially in emerging countries, and whose production was discontinued in 2019. We will remove the light fixtures using a plastic spatula, or a small screwdriver; there is no need to remove it completely or disconnect the electrical connector, because the bulb is within reach, and we can easily remove and replace it - always remembering not to touch the bulb with bare hands, even if it is a LED - we put the light fixture back in place and our work is done.


Posted on 18 February 2025 by ScegliAuto


Related tutorials

How to Replace Dipped Beam Bulbs in the Renault Fluence?
How to Replace Dipped Beam Bulbs in the Renault Fluence?
Renault Fluence (2009-2019 / MK 1) In this tutorial, you will see how to replace the dipped beam bulbs in the Renault Fluence, a very simple and quick operation. First, open the bonnet…
How to Reset the Service Light on the 2011 Renault Fluence?
How to Reset the Service Light on the 2011 Renault Fluence?
Renault Fluence (2009-2019 / MK 1) To reset the service light on the 2011 Renault Fluence, use the arrow buttons located at the end of the lever on the right side of the steering wheel…
Where to Find the OBD Port of the 2015 Renault Fluence
Where to Find the OBD Port of the 2015 Renault Fluence
Renault Fluence (2009-2019 / MK 1) If you have not been able to locate the OBD port inside your 2015 Renault Fluence, do not worry because this guide will explain where it is located a…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos