Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install a spacer on the steering wheel of a Renault Clio IV

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Accessory kit

See other generations:
Video tutorial

In this video, we see how to install a spacer for the Renault Clio IV. It is an accessory that is used to bring the steering wheel closer to the driver, allowing for a more comfortable and sporty driving position; in fact, it provides a better perception of the steering and more precise control of the vehicle.

The first thing to do before removing the steering wheel is to disconnect the battery, as we will need to remove the airbag.

To do this, we insert a screwdriver into the holes on the sides to release the springs, and then disconnect the electrical connector. The airbag cables are very long, so there is no need to extend them.

Now, we unscrew the central screw of the steering wheel. The spacer can be found on gardustech.com with the code 15413 and a cost of 230.00 euros, plug & play installation, all services are maintained.

We pass all the wires through the spacer and then through the steering wheel, pass the screw included in the kit and tighten it to the steering wheel. Reconnect all the plugs, being careful not to pull on the wires, reattach the safety clip to the airbag and gently push until we hear the "click" that assures us it has returned to its housing.

Reconnect the battery and the job is done.


Posted on 15 April 2025 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag from a Renault Clio
How to Remove the Steering Wheel Airbag from a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Follow the steps to dismantle and replace the steering wheel airbag on a Renault Clio, using the instructions below. First, open the bonnet of your c…
How to Remove the Steering Wheel from the Renault Clio 3
How to Remove the Steering Wheel from the Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this video tutorial, learn how to remove and replace the steering wheel along with its airbag on the third generation Renault Clio in simple and q…
How to replace the gear knob of the Renault Clio
How to replace the gear knob of the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) If the gear knob in your Renault Clio is excessively worn and you want to replace it with a new one, simply read the following guide carefully and fo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos