Do it yourself
Frequently asked questions about cars and motorcycles

How to clean the engine of a Renault Trafic II through decarbonization

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Checks and maintenance

First of all: what is decarbonization? It is a process of removing carbon deposits that accumulate on the cylinder head, valves, and combustion chamber. Over time, these deposits can cause damage, increase fuel consumption, and compromise engine performance. The method used by the YouTuber is to inject gaseous hydrogen into the engine: hydrogen, thanks to its chemical properties, promotes the combustion of carbon deposits at high temperatures, through a phenomenon called "pyrolysis", transforming them into gases that are expelled. It is considered an effective and safe method, as it only acts on residues without damaging components. As a preventive measure, it is recommended to carry out this process at least once a year (or every 15/20,000 km), especially for diesel engines: therefore, it is useful to include it in the regular service.

Posted on 20 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Trafic (2001-2014 / MK 2) Today we will explain how to replace the cabin air filter of the Renault Trafic 2. The cabin air filter box, unlike other vehicles where the box is l…
Renault Trafic (2001-2014 / MK 2) Below, you will find the instructions that will allow you to reset the service light for the routine maintenance oil change on the Renault Trafic. Fi…
Renault Trafic (2014-2026 / MK 3) In the attached video, one of the available variants of the Renault Trafic 3 is shown, and now we will learn the procedure to turn off the service li…

Other guides you may be interested in

    Frequently Asked Questions

    • Trafic 2014-2027 - Where is the inertia switch located in the Renault Trafic van? Read answer
    • Trafic 2014-2027 - Why does the Start and Stop of a Renault Trafic not work? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos