|
Do it yourself
| |||
| ||||
How to replace the rear taillight of the Renault Scenic III
Model: Renault Scenic
Scenic 3, MK 3, MK III, Scenic III
- Years 2009-2015
In this video we can see how to replace the rear lights of the Renault Scenic III, specifically the ones above the rear tailgate. In fact, if we lift it, we can see that in the panel of the lining, right above the light, there is an access panel that can be easily removed with a tab. Inside we find a key that can be turned by hand; be careful not to drop it inside the bodywork. Then, slowly and gently, lower the tailgate and remove the optical group from its housing, disconnecting the electrical plug. Turn the bulb holder and remove the bulb. Replace it, being careful not to touch the new bulb with bare hands, and put it back inside the optical group. Reconnect the electrical connector and put the optical group back into its housing. Close the handle and then the access panel. Operation completed.
Posted on 10 July 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Scenic
(2009-2015 /
Scenic 3, MK 3, MK III, Scenic III)
With the help of the following video tutorial, we will show you the steps to replace the rear headlight of the Renault Scenic model mk3 on your own. …
Renault Scenic
(2009-2015 /
Scenic 3, MK 3, MK III, Scenic III)
Before starting, open the boot lid. This will expose the cover of the screws that secure the light on the inside of the boot. Start by removing this …
Renault Scenic
(2009-2015 /
Scenic 3, MK 3, MK III, Scenic III)
Today we will discover the instructions for disassembling and replacing the rear light and its bulbs of the Renault Scenic and Grand Scenic. First, o…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.406
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |