Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to remove the door panel and button on a Renult Megane

Renault Megane - Video tutorial

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Door panel
Operation: How to remove the door panel and button on a Renult Megane

How to remove the door panel on a Renult Megane? Don't worry, let's see how to proceed: before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. Remove the window control panel with a lever, then use a screwdriver to unscrew the fastening screws placed on the plastic panel. Once all the screws have been removed, with the lever we remove all the plastic clips that block the door. We detach the door panel with our hands, unhook any power supply terminals and release cable. We replace the window control panel and the panel.


Posted on 30 October 2023 by ScegliAuto



How to remove the door panel (left side) on Renult Megane
Renault Megane (2002-2010 / Megane 2) How to remove the door panel (rear left side) on a Renault Megane? Before starting the disassembly work, let's disconnect the battery terminals in th
How to remove the door panel of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) How to remove the door panel of a Renault Megane? Let's see the disassembly of the right door panel. Before starting the disassembly work, let's disc
How to remove the door panel of a Renault Megane?
Renault Megane (1995-2003 / Megane 1) So let's start by going to open the front door of our Renault Megane. Once this is done, we will have to proceed by removing the internal opening han

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos