Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight bulb of the Renault Triber?

Model: Renault Renault Various
Part: Headlight bulb

To replace the headlight bulb of the Renault Triber, you will need to open the hood so that you can access the components located inside the engine compartment: here you will be able to locate the inner covering panel of the optical group that needs to be detached. Once the panel has been removed, you can then remove the bulb located inside the optical group and disconnect its connector: at this point, you can connect the new connector to the bulb, inserting it into the optical group and then closing everything with the panel.

Posted on 18 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Renault Triber located?
Where is the fuse box of the Renault Triber located?
Renault Renault Various If you want to find the fuse box inside your Renault Triber, all you have to do is carefully read the following guide and follow all the steps descri…
How to reset the service indicator light on the Renault Triber
How to reset the service indicator light on the Renault Triber
Renault Renault Various In the following guide, we will help you properly complete the manual reset of the service light on the display of your Renault Triber. First of all,…
How to replace the battery of the Renault Triber
How to replace the battery of the Renault Triber
Renault Renault Various Before discovering how to replace the battery located inside your Renault Triber, we remind you that the entire operation must be carried out with th…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos