|
Do it yourself
| |||
| ||||
How to remove the starter motor from a Renault Trafic or Opel/Vauxhall Vivaro
Model: Renault Trafic
MK 2
- Years:
2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Video tutorial
Let's see how to replace the starter motor on a Renault Trafic or Opel/Vauxhall Vivaro: we need to remove the grille and front protections, then unscrew the bolts of the front bumper. The starter motor is located in the front part of the engine compartment, visible through a hole, after we have removed the bumper: it is more easily accessible from the front, rather than from the bottom. As always, before working on the electrical system, disconnect the battery, then remove the electrical connectors and fixing bolts, then extract it through the access hole. In this way, we avoid removing the air filter, front lights, and other components of the engine compartment: the traditional method from the bottom requires at least three hours, while instead removing the front grille will not take more than 60 minutes. We recommend using protective gloves and a set of long sockets, given the limited space available.
Posted on 6 October 2025 by ScegliAuto
Related tutorials
Renault Trafic
(2001-2014 /
MK 2)
In this video we can see how to disassemble the front panel of the Renault Trafic, the one that contains the manufacturer's logo. The same procedure …
Renault Trafic
(2001-2014 /
MK 2)
In this guide, see the main instructions that will allow you to remove and replace the clutch pump on a Renault Trafic, as well as on an Opel Vivaro.…
Renault Trafic
(2001-2014 /
MK 2)
In this video tutorial, you will learn how to disassemble and replace the dipped beam bulb on the front headlight of a Renault Trafic, but also on an…
Other guides you may be interested in
|
How to reset the tyre pressure warning light on the Dacia Sandero?
The tyre pressure warning light that appears on the instrument cluster of the Dacia Sandero can be reset by inflating the tyres until they reach the correct pressure value: this value is indicated on the sticker attached to the driver’s door pillar. Once the inflation is complete, navigate through the menu that appears on the instrument cluster to find the option related to the tyres: select this with the OK button, which should then be held down for a few seconds to completely turn off the light. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.090
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
