Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the bumper of the Scenic 3

Model: Renault Scenic Scenic 3, Scenic III, MK III, MK 3 - Years 2009-2015
Part: Front bumper

In the following article, we will see how to replace the front bumper of the Renault Scenic 3. For this operation, you will need a 10mm socket wrench. First, you need to remove the 2 screws located in the wheel arch. Once the 2 screws are removed, you should move the wheel arch liner and remove the 2 screws located behind the wheel arch panel. After removing all the screws, you need to open the hood and secure it with the appropriate hook. At this point, you need to remove the 6 screws located above the bumper; now it will be possible to remove it, so be careful with the paintwork to avoid damaging it. To install the new bumper, you will need to screw in all the screws that were removed to take off the old bumper.

Posted on 26 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the front bumper of the Renault Scenic?
How do you remove the front bumper of the Renault Scenic?
Renault Scenic (2016-2022 / MK 4, MK IV, Scenic IV, Scenic 4) The removal of the front bumper of the Renault Scenic is carried out by loosening all the screws that secure it to its housing. The screws in questio…
How do you remove the front bumper of the Renault Scenic?
How do you remove the front bumper of the Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, Scenic III, MK III, MK 3) To be able to remove the front bumper of the Renault Scenic you must first loosen the bolts located in the lower part of the bumper. Subsequently, it…
How to remove the rear bumper of a Renault Scenic
How to remove the rear bumper of a Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, Scenic III, MK III, MK 3) Before we can start, we will have to go and open the tailgate of our Renault Scenic. So let's start by unscrewing and removing the screws that secure…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos