Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the key remote of a Renault Megane.

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

See other generations:
Video tutorial

To replace the battery of the remote key for a Renault Megane car, you will need to follow the steps shown in this video tutorial. Take the remote and press the button on the side of the key fob; this will allow you to unlock and then remove the mechanical key inside the casing.

At this point, use a flathead screwdriver and insert the tip into the slot on the edge of the remote, gently prying it open to access the casing. Remove the old battery and insert the new one; finally, close the remote by aligning the two halves of the casing and pressing until you hear a "click.


Posted on 2 January 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on the Renault Megane
How to Replace the Key Fob Battery on the Renault Megane
Renault Megane (2002-2010 / Megane 2) These short and simple steps will guide you on how to disassemble and replace the battery of the key fob for the Renault Megane, following the instru…
How to Change the Key Fob Battery of a Renault Megane
How to Change the Key Fob Battery of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) How do you change the key fob battery of a Renault Megane? Let's see in this detailed video how to do it. Take the key fob and, using your fingers (t…
How to Replace the Key Fob Battery on a Renault Megane 4
How to Replace the Key Fob Battery on a Renault Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) To replace the battery in the key fob of your Renault Megane 4, you will need a small flat-head screwdriver or an old key to use for leverage, along …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos